How Can PTC Heaters Be Optimized?
- Oct 25, 2018 -

The heating element of PTC heater is installed with safety protection device, and the current will be cut off automatically when the operation is abnormal to maintain safety.2. PTC is integrated with heating element, and has average heating control effect.For example: when used in heaters, it can independently control single PTC (500W, 800W), double PTC (1000W, 1500W) or triple PTC heating elements (1500W, 2000W), effectively saving power cost and improving product life.3. The connection point between the pole and the terminal must be welded to prevent heating, cold contraction or thermal inflation of the element as the temperature increases due to the loosening of the electrode.4. The package design of PTC heating element has single and double insulation protection.Contact with metal will not result in electrical contact or short circuit.5. The electrode heating element is closed and is suitable for use in bathrooms or places with high humidity.6. When installed with a double insulated heating device, it can be used in water without leakage or short circuit. When heated and dried, it will not break or burn out the container.7. No odor, no radiation and no oxidation;When used for a long time, there is no shortage of oxygen.8. With fast thermal response time and low surge current.Contact with flammable objects such as matches, cotton, and paper will not cause fire.9. No choice control of various temperatures, static heating can effectively reduce product cost and save power effectively.10. The heating components can be used not only in the heater fan, but also in general household appliances, especially air conditioners.11. Characteristics of PTC heater (1) no thermostat need to restart the operation of the power supply (2) almost unlimited life (3) no moving parts wear and tear (4) (5) the very low cost without electrical noise (6) the higher the temperature, using more power efficiency (7) belongs to burn for PTC heat conductor used PC motherboard protection, under the condition of oxygen to maintain constant temperature, in order to protect the electronic component failure.Suitable for medical aid, cosmetology, flow ironing, humidity control, electric heating, sanitary treatment, air purifier, etc.(1) power: 2 w ~ 2000 w (2) the surface temperature: 60 ° C to 240 ° C (3) the voltage: AC/DC 5 v ~ 600 v (4) the conductor: 22 awg150 mm (5) the PTC thermal conductor power (watts *) increasing cooling rate.When there is no air flow (low heat dissipation) under thermal conditions, the power (W) is reduced.This also applies to the surface temperature, which increases or decreases the power (W) with the surface temperature of the heater's power (W).(6) power (MAX) is the most efficient heat transfer power (W) under the condition of the surface temperature of 240 ° C.There is no ambient air flow (very low heat dissipation rate) under the condition of stable 5-6 minutes of heating measured at power (MIN) power (W).(7) the sending power of general heat is the maximum power of 5% ~ 80%.For indirect heating water, the maximum power supply is only 15% ~ 60%.The power (W) is related to the varying contact materials, radiators, large heat dissipation area, ambient temperature, air flow and product applications.(8) the smaller model can be designed according to the customer's requirements.The current trend in producing car engines has been to gradually reduce the amount of "waste" heating in the available "waste" heat tanks.In an effort to reduce the room heating time while increasing the room temperature, the electric heater system has been developed to supplement the current hot water based on the performance of the vehicle heater with a new PTC (positive temperature coefficient).The complementary heater system of unptc is provided with automatic power adjustment response to ambient temperature conditions, HVAC fan speed, and temperature with self-regulating heater.In addition, the power consumption of the PTC heater can be automatically matched to the electrical power level available for all vehicle operating conditions.Features of the new PTC auxiliary heater model (1) multiple heater phases are possible.Single stage small scattered heating heater, can produce powerful four or five stages of the electronic control heater easily twice (2) thermal safety and long service life: of all the high output mode, switch components and printing plate thermal electric road bus insulated from each other, in addition, excessive temperature in cut out PTC electronic (3) the client's specific application and reduce die manufacturing time shorter development time (4) charged corrugated can withstand external shocks.

Remark:

.

SUBMIT

.